Jotun Marine paint Jotamastic 80 Standard
GZ industrial supplies Nigeria have huge stock of Jotun Marine paint Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses. Jotamastic 80 is recommended as an anti-corrosive coating for steel above and below water. The aluminium or aluminium red-toned colour should be used below the waterline.
Jotamastic 80 is very surface tolerant, so it can be used with good results in areas where high standards of preparation are not possible. For best results apply two coats above the waterline and three coats below the waterline at a typical spreading rate of 8 sq.metres per litre.
Use Jotamastic 80 Standard when painting at temperatures above 10°C. Use Jotamastic 80 Wintergrade when painting at temperatures below 10°C.
For a two-pack topcoat above the waterline use either Penguard Topcoat or the Hardtop range of paints. For a single pack topcoat, use either Pioner Topcoat or Conseal Touch-Up.
Pack size is 4.6 Litres or 18.3 Litres including hardener.
- Surface tolerant
- Great value for money!
- Use aluminium versions below the waterline
Areas of application for suitability:
|Application method||Brush, roller or high pressure airless spray|
|Coverage||7 m² per litre|
|No. of recommended coats||3|
|Drying time @ 23°C||10 hours|
|Curing time @ 23°C||7 days|
|Pot life @ 23°C||2 hours|
|Thinner||Jotun Thinners No. 17 or SML Epoxy Thinner|
|Water resistance||Very Good|
|Gloss retention||Very good|