Mobil

Mobil Automatic Transmission Fluid D/M

1 review(1) Write a Review
Ask Questions

Mobil Automatic Transmission Fluid D/M

₦0.00
  • Weight: 18.90 KGS
  • Shipping: Calculated at Checkout
In Stock & Ready To Ship!
Current Stock:Only left:

Frequently Bought Together:

Total: Inc. Tax
Total: Ex. Tax
Description

Mobil Automatic Transmission Fluid D/M

GZ Industrial Supplies is the distributors of Mobil Lubricants In Nigeria. Our mobil ATF D/M provides excellent oxidation and friction stability, anti-wear properties, and low-temperature fluidity desired for most automatic transmissions.Mobil ATF D/M is used as the lubricating oil in several types of rotary air compressors under certain service conditions. Its low-temperature properties and resistance to oxidation are important factors in meeting the requirements of this service. 

Features and Benefits

Advantages offered by Mobil ATF D/M over transmission fluids of lower quality are:

•  Excellent oxidation stability — helps resist chemical deterioration over long service periods.

•  High viscosity index — helps retain adequate lubricating body for severe hot-weather service without thickening excessively at low starting temperatures

•  Corrosion prevention — helps provide protection against rusting and corrosion, plus special protection for soldered fittings

•  Foaming resistance — contains an effective anti-foaming agent

•  Elastomer compatibility — is not harmful to synthetic rubber seal materials.

•  Good lubricating characteristics — gives quiet operation, smooth shifting, and excellent wear protection.

•  Controlled friction properties — transmission of power is smooth and efficient throughout all normal temperature ranges.

Specification

ASTM Color, ASTM D1500                         Red

Flash Point, Cleveland Open Cup, C(F), ASTM D92   180 (356)

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445     7.4

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445       35.3

Viscosity Index, ASTM D2270                                 183

Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983   16670

Density @ 15.6 C, kg/l, ASTM D4052   0.850