Angle Grinder Bosch GWS 26-230 JBV + SDS Professional Top performance with double Vibration Control Powerful 2600 W Champion motor with maximum power reserves for greatest material removal and fastest work progress Vibration reduced thanks...

Hex Head Coil Bolt, Grade A, Material Low Carbon Steel, Finish Plain, Thread Size 4-1/2, Thread Style Partially Threaded, Thread Direction Right Hand, Diameter 3/4 In., Length under Head 5 In., Head Width 1 1/8 In., Head Height 1/2 In., Head Type Hex,...

Carriage Bolt, Square Neck, Material 18-8 Stainless Steel, Thread Size Full Thread, Length 1-1/2 In., Drill Size 1/4 In., Head Dia. 0.563 In. to 0.594 In., Head Height 0.125 In. to 0.145 In., Head Type Round, Square Height 0.125 In. to 0.156 In., Square...

Longneck Jamb Saw, 120V, 60 Hz, 7.5 Amp Motor, 8000 No Load RPM, 6 3/16 In. Carbide Tooth Blade, Arbor Size 5/8 In. Dia, Blade Adapter 20mm, Height Adjustment from 0 to 1-1/16 In., Trims Wood Door Jambs And Base Boards, Cuts Inside Corners And Under Toe...

Carpet Cutter/Drill Guide, Size 3/8 In (9.52mm), Hardened Steel, Serrated Blade, Stainless Steel, Beveled Construction, Bores A Clean Hole In A Carpet And Serves As A Drillbit Guide To Prevent Carpet Snags And Snowballs, Can Be Used On Any Floor Carpet,...

Traction Nonslip Rug Strip, 2-1/2 In. x 25 ft., One Roll, One Side Attaches Permanently to Rug and Other Side has Nonslip Surface, , For Holding Rugs and Mats in Place, For Use With Carpet Flooring.

Double Sided Carpet Tape, 15 ft x 2-1/2, For Indoor Or Outdoor Use, Use As Temporary Protection Over Carpeting (Except Wool), For Carpet Without Tack Strips, For Use With Carpeting

Double-Sided Tape for Vinyl, 1 7/8 In x 75 Ft, Non-Toxic, Acrylic Adhesive Construction, One Roll, For Indoor/Outdoor Carpet Installations, For Use With Carpet Flooring.

PVC Heating Blanket, For 1/2 to 1 1/2 Inches PVC, Bends/Offsets/Saddles.

Electric PVC Heater/Bender, For 1/2 to 2 Inches PVC, 120 VAC/2500 Watts Generator.

Mechanical Conduit Bender, Heavy Duty, Capacity 3/4-2 In. EMT, 1/2-1 1/4 In. IMC, 1/2-1 1/2 In. Rigid and Aluminum Conduit, Steel Frame, Radius Bend Marked on Each Shoe, Built-In Ratchet, Shoe Locator, Bending Degree Indicator, Wheel Type Rubber, All...

Pipe and Tube Bending, Manual, Capacity 16 ga. sq., Steel, Wheel Type Steel, Wheel Dia. (In.) 2, Manual Pipe and Tubing Bender Capable of Bending 3/4 In., 2 In. O.D. Tube with Appropriate Dies, Use to Make Up to 120 Degrees Bends In Round and Square...