Crankshaft Deflection Gauge Winters
GZ Industrial Supplies Nigeria is the distributor of Winters Measuring Instruments in Nigeria. This Crankshaft Deflection Gauge Winters enables the user to check the bearing alignment and deflection of the crankshaft, the deflection gauge shows the distance between adjacent crank webs, which are read at different angular positions of the shaft. Crankshaft should be rotated in one direction, and readings are taken at the defined angular locations. Crankshaft deflections should always be taken on an engine at ambient temperature and compared to the baseline measurements.
The robust construction and the hardened measuring tips make it possible to use the instrument on all kinds of engines. The deflection gauges can also be used to measure and indicate cylinder wear.
If the deflection is measured after an interval of time, it is both important and necessary that it is taken at the same point otherwise the reading will not give a real reflection about the degree of deflection. The ends of the indicator should rest in the punch marks in the crank webs. If these marks are not present, they must be made so that the indicator may be placed in its correct position. Normally a centre punch is used to make markings so that each time the deflection is taken at the same point. Ideally the deflection needs to be taken at four points of the crank namely top, bottom and the two sides.
Features of Crankshaft Deflection Gauge Winters
To check alignment and delflection on all types of engines
StabiliZR™ dampened movement minimizes effects of pulsation and vibration
Most economical, all-purpose pressure gauge
1.5” (40mm) to 4” (100mm) sizes
Friction bezel rings
Black steel case
Brass wetted parts
ASME B40.100 compliant (EN837-1 available)
5 year warranty
Easy adjustment of gauge position
Compact and robust construction
Ready to use package with case
Technical Specifications of Crankshaft Deflection Gauge Winters
|Dial||1.5” (40mm), 2” (50mm), 2.5” (63mm), 4” (100mm) white aluminum with black and red markings|
|Case||Steel, painted black (plastic available)|
1.5” (40mm), 2” (50mm), 2.5” (63mm): Acrylic
4” (100mm): Glass
1.5” (40mm), 2” (50mm): Steel, painted black
2.5” (63mm), 4” (100mm): Steel, chrome plated
|Connection||1/8” NPT or 1/4” NPT standard|
|Movement||Brass, StabiliZR™ dampened movement (silicone in sealed chamber)|
|Over-Pressure Limit||25% of full scale value|
|Working Pressure||Maximum 75% of full scale value|
|Ambient/Process Temperature||-40°F to 150°F (-40°C to 65°C)|
|Accuracy||±3-2-3% ANSI/ASME Grade B|
Contact us for further details and availability within the storefront in your location.