Hellog oxygen and acetylene cylinder trolley with inflatable tires
GZ Industrial Supplies are distributor of Hellog Energy industrial materials and welding products in Nigeria, Our Hellog oxygen and acetylene cylinder trolley with inflatable tires is a high quality Oxygen & Acetylene Welders Trolley. Essential trolley for oxygen acetylene welding, keeping the gas bottles safe and manoeuvrable.
Product specification
- Designed for 1 bottle of each oxygen and acetylene.
- c/w rod & pipe holders.
- Steel retaining chain fitted.
- Blue epoxy paint finish.
- All models 1085mm tall x 915mm wide.
- Choice of 2, 3 or 4 wheel models.
- Choice of 400mm pneumatic or solid wheels.
PRODUCT DESCRIPTION AND USES:
For transport and storage of gas cylinders. Frame segregates cylinders to prevent damage. Suitable for Ø240/290mm cylinders. Cylinders secured by galvanised chain. Pierced base helps disperse condensation. Rear wheels are made from Vulcanised Rubber which offers low rolling resistance,meaning they are easy to manoeuvre, are non marking and are a soft yet highly durable compound.
TECHNICAL SPECIFICATION
| Suitable for |
Oxygen & Acetylene |
| No of Cylinders |
2 |
| Max. Cylinder Diameter |
290 mm |
| Max Load |
200 kg |
| Wheel Size |
300 mm |
| Rear Wheels |
No |
Frequently Asked Questions
Q1 What does an oxygen regulator do?
The regulator (also known as the adjustable regulator, flowmeter, or control valve) reduces, controls, and measures the flow of oxygen to the patient to maintain a safe and effective working pressure. The regulator and flowmeter are typically combined into a single mechanical fitting on the oxygen tank.
Q2 How do you use an oxygen regulator at home?
Connect the tube and cannula to the regulator's oxygen outlet. Use the flow control knob to set the oxygen flow to the prescribed amount. Place the cannula in place. You may now replace the cylinders by loosening the T-handle and removing the regulator.
Q3 How long do oxygen regulators last?
Long Regulator Life Begins with Proper Maintenance.
In addition, the item should be taken from service at least once every five years (more frequently in some situations) and returned to the manufacturer or a qualified agent of the manufacturer for inspection and/or refurbishment as needed.
Q4 What pressure do we set acetylene regulators to?
The recommended oxy/acetylene cutting tip pressures vary by size. To cut steel less than 1 ½" thick and without manufacturer settings, set the acetylene regulator to 10 psig and the oxygen regulator to 40 psig.
Related Article
MEDICAL OXYGEN REGULATOR
Industrial Benefits of Oxygen Gas
Industrial Gases in Nigeria 2024 Review
Please note that details and specifications contained herein, are correct at the time of publishing. GZ industrial Supplies reserve the right to change specifications at any time without prior notice.
