Soil meter 3 in 1 AIK-TPH01805 Hellog
GZ Industrial Supplies is a distributor and supplier of hellog Agricultural Equipment in Nigeria. The Soil meter 3 in 1 AIK-TPH01805 Hellog has three functions Soil moisture meter,soil pH meter, and light intensity meter. Our Soil meter 3 in 1 AIK-TPH01805 Hellog does not require a power source.
Features of Soil meter 3 in 1 AIK-TPH01805 Hellog
It integrates three functions, It can measure the humidity of the soil, the degree of pH, and the intensity of sunlight required for plant photosynthesis .
Easy to use and high quality.
This instrument is a good helper for gardening.
It can test the pH value (pH) of the soil, soil moisture and light intensity, without battery
Specification of Soil meter 3 in 1 AIK-TPH01805 Hellog
Material: Plastic
Single weight: 103g
Single soil instrument size: 33*10.5*4.5CM
Probe length: 20.5cm
Soil pH can generally be divided into the following levels: PH value Soil pH ＜4.5
Very strong acid 4.5—5.5 Strong acid 5.5—6.5 acid 6.5—7.5 Neutral 7.5—8.5 alkaline 8.5—9.5 strong alkaline ＞9.5 Very strong alkaline.
Adjustment of soil pH:
1. Lime is often used to improve acidic soil to neutralize active acid, latent acid, and improve soil structure; purple shale powder, fly ash, plant ash, etc. can also be used.
2. Artificial acidification of neutral and calcareous soils, open- field flowers can use sulfur powder (50g/m2) or ferrous sulfate (150g/m2), which can lower the pH unit by 0.5-1. It can also be poured with alum fertilizer.
3. To apply gypsum to alkaline soil, phosphogypsum , ferrous sulfate, sulfur powder, acid weathered coal can also be used.
Instructions:
When measuring the pH and humidity of the soil;
first insert the probe as deeply as possible into the soil. (10CM has been uploaded)
Move the button on the pen to MOIST, MOIST is the moisture button, the corresponding table is MOIST, DRY is dry, WET is wet, the value 1-3 (red part) indicates that water is needed, 4-7 (green part)
It is appropriate, please adjust the watering time according to the plant species, 8-10 (blue part) means too wet.
Toggle the button on the pen to PH, PH is the pH key, the corresponding table is 8-3.5, ALKALINE is alkali, ACDIC is acid, and the value 7 is basically neutral.
The smaller the number, the greater the acidity. Please refer to the plant The varieties adjust the soil pH. The LIGHT key is the illuminance. The measurement range is 0- 2000 lumens.
The larger the value, the stronger the light.
Please decide whether you need shade according to the plant species.
Be careful not to touch the stone when inserting the electrode when in use, do not use too much force, otherwise it will easily damage the electrode.
Wash the electrode after use.
Move the button on the pen to MOIST, MOIST is the moisture button, the corresponding table is MOIST, DRY is dry, WET is wet, the value 1-3 (red part) indicates that water is needed, 4-7 (green part) It is appropriate, please adjust the watering time according to the plant species, 8-10 (blue part) means too wet.
Toggle the button on the pen to PH, PH is the pH key, the corresponding table is 8-3.5, ALKALINE is alkali, ACDIC is acid, and the value 7 is basically neutral. The smaller the number, the greater the acidity.
Please refer to the plant The varieties adjust the soil pH. The LIGHT key is the illuminance. The measurement range is 0- 2000 lumens. The larger the value, the stronger the light.
Please decide whether you need shade according to the plant species. Soil pH Soil pH is also called "soil reaction". It is the acid-base reaction of the soil solution.
Mainly depends on the concentration of hydrogen ions in the soil solution, expressed in pH. A solution with a pH value of 7 is a neutral solution; a pH value less than 7 is an acidic reaction; a pH value greater than 7 is an alkaline reaction.
