LubeMax Synthetic gear Lubricants ISO 32-1000

LubeMax Synthetic gear Lubricants ISO 32-1000

GZ Industrial Supplies is the distributor and supplier of lubemax products in Nigeria.  Lubemax synthetic gear & bearing lubricants are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.

These PAO based fluids provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The inherently high viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. The low coefficient of friction of the Lubemax gear & bearing lubricants substantially reduces power consumption and gearbox operating temperature, further prolonging the useful life of the lubricant.

Application and Benefits of LubeMax Synthetic gear Lubricants ISO 32-1000

Lubemax synthetic gear & bearing lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or rolling element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs.

They are also recommended for use in applications where the corrosion of yellow metals is a concern, as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper. This gear and bearing lubricants are compatible with essentially all seal materials, plastics and paints, including nitrile Buna N, neoprene, viton, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer. LubeMax Syngear Lubricants are produced exclusively from premium base oils and advanced additive technology to deliver anti-wear and extreme pressure protection in sustained, long-life applications. These oils have excellent thermal and oxidation stability allowing them to resist thickening produced by sustained, high temperature operation. They are non-corrosive to gear and bearing materials such as steel, copper, bronze, Babbitt, and cadmium-nickel. These oils provide superior foam resistance, water separation, low temperature fluidity allowing their use in gears and bearings exposed to a wide range of climatic conditions.

LubeMax Syngear Lubricants tenaciously hold a strong film of lubricant on metal surfaces. Along with foam control, this lubricant film maximizes gear protection and ensures extended service life in the most arduous applications. LubeMax Syngear Lubricants provide value through the following benefits:

•  Long service life — extended drain intervals can result in significant cost savings.
• Excellent thermal and oxidation stability — premium base oil ensures outstanding product stability even in the presence of high loads and high temperatures.
•  Corrosion protection — maximum corrosion protection of ferrous and non-ferrous metals.
•  Water separation — water/oil emulsions are prevented, which minimizes corrosive damage.
• Low foam – maintains protective lubricant film in all operating conditions.

FREQUENTLY ASKED QUESTIONS.

1. What are synthetic gear lubricants?

Synthetic gear lubricants are lubricants that are made from synthetic base oils and additives, rather than from mineral oils. Synthetic gear lubricants have superior properties such as thermal stability, low temperature performance, wear protection, and oxidation resistance compared to mineral oils.

2. Do synthetic gear lubricants provide better fuel efficiency?

Yes, synthetic gear lubricants' reduce friction and enhanced thermal stability can contribute to improved fuel efficiency and reduced energy consumption in some applications.

3. Are synthetic gear lubricants compatible with seals and gaskets? 

Synthetic gear lubricants are generally compatible with common seal and gasket materials, but it's advisable to check manufacturer recommendations and conduct compatibility tests if needed.

RELATED ARTICLES.

The Global Synthetic Lubricants Market 2023

WHERE TO BUY INDUSTRIAL LUBRICANT IN NIGERIA

Contact us for Lubemax products and other quality lubricants.