Hyundai Welding electrode low hydrogen E 7018 2.6mm for stick Welding
GZ industrial supplies is provider of Hyundai Welding electrode low hydrogen E 7018 2.6mm for stick Welding
Other Hyundai Welding Consumables, Flux Cored Wire, Hyundai Welding Consumable, Saw Wire & Flux Product, Solid Co2 MIG Wire & Welding Electrodes
Hyundai Electrodes Welding ARC E7016 E7018 E8016 E8018 Wire
Characteristics of Range of Hyundai Welding consumables and Stick Electrodes, Solid CO2 GAS Shield Welding wire , Stainless Steel MIG & TIG Wire , Flux Cored Wire
Applications
S-7016.G can be used for welding of high tensile steel of ships , such as bridges , buildings, pressure vessels .
Applications
Characteristics on Usage
S-7016.G deposits weld metal of extremely good mechanical properties .
Its usability is good in all position welding and weld metal of good appearance can be obtained assuredly .
Noted on Usage
` Dry the electrodes at 300~ 350 ( 572~ 662 ) for 60 minutes before use .
a Adopt back step method or strike the arc on the small steel plate prepared for this particular purpose to prevent below hole at the arc starting .
b Use wind screen against strong wind
Current
AC or DC +
Typical Chemical Composition of All-Weld Metal ( % )
C Si Mn P S
0.08 0.66 1.40 0.017 0.011
Typical Mechanical Properties of All-Weld Metal
YS TS EL Temp CVN-Impact Value
MPa ( lbs/ in2) MPa ( lbs/ in2) ( % ) ( ) J ( ft . Ibs)
560( 81, 300) 641( 93, 100) 30.4 -30( -22) 68( 50)
Size Available and Recommended Currents( Amp.)
Size mm ( in) 2.6( 3/ 32) 3.2( 1/ 8) 4.0( 5/ 32) 5.0( 3/ 16) 6.0( 15/ 64)
Length mm ( in) 350( 14) 350( 14) 400( 16) 400( 16) 450( 18)
F 55/ 90 90~ 130 130~ 180 180~ 240 250~ 310
FV-up, OH 50~ 80 80~ 120 110~ 170 150~ 200 ---
Please contact us for any information regarding product availability
