LIQUI MOLY Automatic Transmission Fluid - ATF III 1 Litre

GZ Industrial Supplies is the distributor of LIQUI MOLY Automatic Transmission Fluid - ATF III in Nigeria. Automatic transmission oil with high performance reserves. For vehicles with tried and tested transmission technology. Excellent wear protection and favorable friction behavior. Even under the most difficult conditions and during large temperature fluctuations, it guarantees flawless hydraulic gear functioning. Provides extremely good lubrication properties and outstanding corrosion protection. Has good seal compatibility.

Properties of LIQUI MOLY Automatic Transmission Fluid - ATF III 1 Litre

• Highest thermal stability
• Outstanding viscosity stability
• Optimum stability to aging
• Outstanding corrosion protection
• Outstanding chemical resistance
• Excellent low temperature behavior
• Friction and wear reducing

Specifications and Approvals

Allison C4 ∙ Caterpillar TO-2 ∙ Dexron III G ∙ Ford Mercon ∙ Voith H55.6335.XX (G 607) ∙ ZF TE-ML 04D ∙ ZF TE-ML 14A ∙ ZF TE-ML 17C

LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:

MB 236.1 ∙ MAN 339 Typ V1 ∙ MAN 339 Typ Z1 ∙ MAN 339 Typ L1

Technical Data

Density at 15 °C: 0,855 g/cm³ DIN 51757

Viscosity at 40 °C: 36 mm²/s ASTM D 7042-04

Viscosity at 100 °C: 7,7 mm²/s ASTM D 7042-04

Viscosity at -40°C (Brookfield): <= 20000 mPas ASTM D 2983-09

Viscosity index: 191 DIN ISO 2909

Pour point: -48 °C DIN ISO 3016

Flash point: 200 °C DIN ISO 2592

Sulfate ash: 0,10 g/100g DIN 51575

Shear stability, viscosity at 100 °C after 20 h: 5,1 mm²/s DIN 51350-06-KRL/C

Color / appearance: rot

Areas of Application

ATF III is used in automatic transmissions and manual transmissions, in torque converters and numerous power steering systems in accordance with the specifications and operating instructions specified by the motor vehicle and transmission manufacturers.

Contact us for product availability.