MobilGard 1 SHC Synthetic Diesel Engine Oil

Mobilgard 1 SHC is a supreme performance, synthetic diesel engine oil specifically formulated to address the needs of high power, distillate fueled diesel engines. It provides unsurpassed lubrication including long drain capability and extended engine life for today's marine diesel engines operating in severe applications.Mobilgard 1 SHC was specifically developed to address the needs of distillate fuelled, high reliability and high power concentration diesel engines. Special synthetic base stocks and unique additive technology combine superior high temperature performance with unexcelled start-up reliability and wear protection. A true SAE 40 grade, it flows at low temperatures like an SAE 20W product. On very hot engine parts, it resists oil film breakdown better than SAE 50 lubricants. Revolutionary load carrying additives also make it an outstanding wide temperature range gear lubricant.

Benefits

· Extended oil drain intervals, therefore reducing waste oil disposal.

· Quick start-up and immediate oil circulation at low temperatures.

· Superior high temperature performance with excellent cleanliness and low wear.

· Excellent bore polish protection.

· Potential for less make-up oil.

· Longer period between engine overhauls.

· Fuels savings potential

· FZG 12 Extreme pressure gear protection.

Properties

· Exceeds API CD/CF/CF2 performance level.

· Excellent thermal and oxidation stability and resistance to high temperature deposit formation.

· High load carrying ability with good anti-wear properties.

· Excellent rust, corrosion and wear protection with a wide range of bearing materials.

· Excellent water separation and anti-foam performance.

· Low volatility helps reduce oil consumption.

· Fully compatible with conventional mineral oils and mineral oil systems, including seals.

· Exceeds Caterpillar's micro-oxidation test requirements for 3600 Series engines.

 Specification

Grade  40

Ash, Sulfated, wt%, ASTM D874    1.6

Chlorine, ppm, ASTM D6443          150

Density @ 15 C, kg/l, ASTM D4052   0.872

Flash Point, Cleveland Open Cup, °C, ASTM D92   250

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445   14.5

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445     109

Pour Point, °C, ASTM D97        -54

Total Base Number, mgKOH/g, ASTM D2896  15

Viscosity Index, ASTM D2270     136