SIGMA VICOTE 56 SIGMA PROTECTIVE AND MARINE COATINGS
GZ Industrial Supplies is a distributor of Sigma Marine coatings in Nigeria, our SIGMA VICOTE 56 SIGMA PROTECTIVE AND MARINE COATINGS is a single component modified acrylic finish coating, it is used as a finish coat, have colors of white and various other colors and gloss finish, this product is used for marine dry dock, inland marine and sea stores
PRODUCT CHARACTERISTICS of SIGMA VICOTE 56 SIGMA PROTECTIVE AND MARINE COATINGS
- Finish coat for above-water areas
- Good gloss and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES
Substrate conditions
- • Previous coat (chlorinated rubber, vinyl or acrylic coatings) must be dry and free from any contamination
- Substrate temperature and application conditions
- • Substrate temperature during application should be at least 3°C (5°F) above dew point
SIGMA VIKOTETM 56 SYSTEM SPECIFICATION
-
SYSTEMS FOR BOOTTOP AND TOPSIDE – SYSTEM SHEET 3102
-
SYSTEMS FOR DECKS – SYSTEM SHEET 3103
-
SYSTEMS FOR SUPERSTRUCTURE AND DECK FITTINGS – SYSTEM SHEET 3104
INSTRUCTIONS FOR USE
-
Stir well before use
-
The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain
application viscosity
-
Adding too much thinner results in reduced sag resistance
-
Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and
1434)
Air spray
Recommended thinner
THINNER 21-06
Volume of thinner
5 - 10%, depending on required thickness and application conditions
