• Water soluble cargo hold barrier / block -- easily removable with water
• Saves cleaning time and cleaning chemicals
• Ideal when cleaning after coal, pet coke and other difficult cargoes
• Completely safe on all coatings
• Prevents even the most difficult cargo to adhere to the coating
• Easy to apply -- easy to remove
• Provides temporary protection against corrosion
• Water based -- free from hydrocarbon solvents

Appearance       Clear

Density [g/ml]   1,01

Form     Sligthly viscous liquid

pH          6

Directions for Use

After drying, Unitor Slip-Coat creates a thin, non-sticky film on the cargo hold surfaces. The film substantially facilitates the cleaning before next cargo in two ways:

1. The film fills the minute pores in the surface, and prevents small particles from being trapped in the pores.
2. Small, solid particles can be very difficult to remove especially from organic coatings, even with the use of effective cleaning agents and high pressure water jets.

The reason is the build up of electromagnetic forces, and sometimes the only way to remove the particles is by scrubbing. Unitor Slip-Coat provides a barrier between the particles and the surface that minimizes this problem, and the particles may now be removed with high pressure water only. The film is completely water soluble and is easy to remove even with cold sea water. To avoid re-deposition of contaminants a cleaning agent should be used, but at lower dosage rates than what normally is required. UnitornSlip-Coat may also be sprayed on deck, superstructure and other areas exposed to dust during loading and unloading operations.