Work Positioning Belt 3 KARAM

GZ Industrial Supplies is the distributor of KARAM Safety Equipment in Nigeria. This Work Positioning Belt 3 KARAM is used as restraint belts meaning that the belt is worn by a person who is working close to a potential fall. In this instance the person using the belt must set up a height safety system that makes it impossible for them to reach the falling edge. This can be done using a restraint belt and an adjustable restraint lanyard. This is working with restraint rather than fall arrest and therefore because the restraint system makes it impossible for them to reach the fall zone shock absorbing fall arrest equipment is not required. 

Our Work Positioning Belt 3 KARAM Can be used in conjunction with a fall arrest harness. A pole strap also known as a work positioning lanyard can be connected to the work positioning belt to give additional support to the worker allowing them to work more comfortably and therefore safer. All pole straps can be adjusted to pass round the support structure and to accommodate different size users keeping the person working at height comfortable and safe. A separate fall arrest (shock absorbing) device such as a fall arrest lanyard or an inertia reel must also be attached to the harness. 

Features of Work Positioning Belt 3 KARAM

Optimum width comfort pad to provide sufficient lumbar support

Width of Back pad : 14.5 cms.

Two Lateral D-Rings for Work Positioning

Rings for tool holders, bolt bags, etc

Available in sizes- Medium, Large, Extra Large

Conforms to EN 358:1999

Contact us  we have products available in all our stores nationwide.