Digital Ammonia gas detector HP-5800G Holdpeak

GZ Industrial Supplies is a Distributor of Holdpeak Digital Measurement Instrument Meter in Nigeria. The Digital Ammonia gas detector HP-5800G Holdpeak uses imported high precision electrochemical principle sensors for fast response, speed, high precision, and stability to detect concentration of ammonia in any environment. 

Our Digital Ammonia gas detector HP-5800G Holdpeak is widely used in metallurgy, power plant, farms, mines, chemical, scientific research, medical, pharmaceutical, environmental protection and other fields.

For optimal results, these safety steps should be considered;

• To avoid damaging the meter , keep it away from water and hot objects (more than 50).

• Please turn off the backlight to save power consumption and prolong the service life of the battery.

• When the battery is low, the device cannot work. Kindly switch the device off and replace the battery.

• The meter is automatically powered off if no button is pressed in 10 minutes.

• When the buzzer alarms , the measured value is less than the alarming-line you have set up ; so please take measures to protect people， lives and property.

• If you are not going to use this meter for a long period of time , turn off the meter to avoid damage due to the battery oozing liquid . If you take out the batteries when the meter is on , the data preset for the grade 4 and grade 2 alarming-line will be lost ; when the meter is powered on and enabled , the previous values present for the grade 4 and grade 2 alarming will return . If you are going to save the values preset for the two grades of alarming lines , you must turn off the meter normally once.

Specification of Digital Ammonia gas detector HP-5800G Holdpeak