Shell Tellus S3 M 46 209Ltrs Drum
GZ Industrial Supplies is the distributor and supplier of Shell Lubricants in Nigeria. This Shell Tellus S3 M 46 208Ltrs Drum hydraulic fluids are high performance lubricants that use exclusive zinc-free technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical stress, helping to prevent damaging deposits that can decrease the efficiency of your hydraulic system.
Performance, Features & Benefits of Shell Tellus S3 M 46 208Ltrs Drum
Long Fluid Life - Maintenance Saving
Shell Tellus S3 M 46 oils offer an improved capability to extend fluid maintenance intervals and hence reduce equipment downtime through:
- An extended ASTM D943 TOST lifetime, with an oxidative stability that is designed for a minimum 5000 hours TOST life.
- Excellent resistance to breakdown in the presence of water and heat.
These features provide extended maintenance capability without compromising protection or performance, even under severe or extended temperature range applications.
Outstanding Wear Protection
Advanced zinc-free anti-wear additives provide protection over a wide range of conditions, including low an severe duty, and high load operation. This protection has been demonstrated in tough industry standard hydraulic pump tests such as the Denison T6C and Eaton Vickers 35VQ25 tests.
Maintaining System Efficiency
Superior cleanliness and filterability; coupled with excellent water separation, air release and anti-foam characteristics, all help to maintain or enhance hydraulic system efficiency. The filterability of Shell Tellus S3 M46 is maintained even when the fluid is contaminated with water. Shell Tellus S3 M46 fluids have an ISO 4406 cleanliness of 21/19/16 or better ex Shell filling lines. As recognized by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could affect the cleanliness level.
Low Toxicity Towards the Environment
Shell Tellus S3 M 46 has a reduced environmental impact in the event of a leak or accidental spillage compared to conventional zinc-based hydraulic fluids. This is achieved through the use of zinc-free anti-wear technology and low sulphur base oils. Shell Tellus S3 M46 is classified as 'not harmful' to freshwater and marine invertebrates when tested as water-accommodated fractions (WAFs) according to OECD and EPA test guidelines. For further reductions in environmental impact, we offer the Shell Naturelle range of environmentally considerate lubricants. For applications that experience wide temperature variations, we recommend the Shell Tellus S3 “V” series of hydraulic fluids.
Compatibility & Miscibility
Compatibility & Miscibility ·Compatibility Shell Tellus S3 M 46 fluids are suitable for use with most ·hydraulic pumps. Fluid Compatibility Shell Tellus S3 M 46 fluids are compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire resistant fluids). Seal & Paint Compatibility Shell Tellus S3 M 46 fluids are compatible with seal materials and paints normally specified for use with mineral oils.
Typical Physical Characteristics
|Properties||Method||Shell Tellus S3 M 46|
|ISO Viscosity Grade||-||-||ISO 3448||46|
|ISO Fluid Type||-||-||ISO 6743-4||HM|
|Kinematic Viscosity||@0°C||cSt||ASTM D445||565|
|Kinematic Viscosity||@40°C||cSt||ASTM D445||46|
|Kinematic Viscosity||@100°C||cSt||ASTM D445||6.8|
|Viscosity Index||-||ISO 2909||105|
|Flash Point (COC)||-||°C||ASTM D92||220|
|Pour Point||-||°C||ISO 3016||-33|
Contact us we have products available in all our stores nationwide.