ASkaynak Plasma 65 ultra cutter

(2 reviews) Write a Review
19.00 KGS
Calculated at Checkout
  • ASkaynak Plasma 65-ultra cutter
  • ASkaynak Plasma 65-ultra cutter side view


ASkaynak Plasma 65-ultra cutter

GZ Industrial Supplies is the distributor of Welding equipment and welders brand Askaynak in Nigeria, Our Askaynak Plasma 65 ultra cutter is a powerful plasma cutter idea of cutting operation when on maintenance and repair mode for major and minor work and operations

Features of this ASkaynak 65-ultra Plasma cutter.

  • Ideal for cutting operations in maintenance-repair and steel installation workshops.
  • High performance on cutting of low alloyed steels, stainless steels and aluminium alloys.
  • 380V-3Ph AC input power and max 60 A output current provides cutting of low alloyed steels up to 20 mm.
  • With the latest inverter technology, Inverter Plasma 65-Ultra provides a smooth cutting surface despite its small dimensions.
  • The most portable machine in its class. Weighs only 13 kg!
  • Thanks to Hall Sensor Technology, even problems such as the change of distance between the torch and workpiece since the operator loses his hand accuracy arise, the output current doesn’t change and always flawless cutting performance capability is provided at the adjusted current value.
  • Thanks to this feature you will be able to continuously cut grid, railing and similar form parts having spaced structure without interruption by pressing only once on torch trigger. In case of overheating or instantaneous current increases on the machine due to over loadings on mains, protection unit activates and thermal warning lamp lights to warn the operator.
  • Thanks to advanced electronic design and safe ground connections of the machine, you will be able to perform safe cutting without the life-threatening danger risk due to electric shock.
  • While high-strength rubber coated power cable enable you to work safely during welding, it will decrease your repair & maintenance costs and time loss due to down times.
  • Since it isn’t get affected by mains hums or electromagnetic fields of other equipment operating nearby, no performance loss occurs during the cutting process.
  • You will be able to control and adjust inlet air pressure easily thanks to the air pressure meter located on the front panel.
  • 2 years full parts and labour warranty. 

Control Panel and Functions

Kontrol Paneli ve Kontrol Ünitelerinin Fonksiyonları

Technical Properties Inverter Plasma 65-Ultra 

Input Voltage : 380 V
50/60 Hz
Power Input @ Rated Output : 8 kW (40%)
Input Current (Max) : 15 A (40%)
9.6 A (100%)
Power Factor
: 0,95 (40%)
Rated Output Current,
Voltage and Duty Cycle
: 60 A ; 104 V (40%)
43 A ; 97.2 V (100%)
Open Circuit Voltage
: 225 V (DC)
Current Range : 20 - 60 A
Fuse Size and Type
: 20 A (retarded)
Protection Class : IP21S
Cooling System
: Ventilation cooling
Weight (Without Cables) : 13 kg
Dimensions (W x H x D) : 165 x 280 x 495
Compliance : EN 60974-1 ; EN 60974-10 ; CE
Frequently Asked Questions
1. How can a defective welding machine be identified?

Lack of consistency, cracks running through the middle of the bead, a bead that is too thin, and/or a lack of parent metal discoloration (which should be about 1/8 of an inch) are indications of a subpar welding process.

2. Which welding takes less time?

MIG welding. This is because MIG welding is quicker than TIG welding, and can be produced at a lesser cost. Additionally, MIG welding is simpler to master, and to create welds that require little to no cleaning and finishing.

3. What's the strongest weld?

What Type Of Weld Is The Strongest? TIG welding is often considered the strongest weld since it produces extreme heat, and the slow cooling rate results in high tensile strength and ductility. MIG is also an excellent candidate for the strongest type of weld because it can create a strong joint.

Related Articles

Welding Maintenance Tips

Understanding MIG/Mag Welding Process, Machines and accessories

A Comprehensive guide for selecting the right welding machines for Industrial applications

Buy welding machines and consumables from GZ Industrial Supplies

Product is always available, Kindly contact us to be sure product is available near our storefront in your location

Product datasheet downloadpdf-log.png

View AllClose

2 Reviews

  • 5


    Posted by Albert Asuquo on Dec 13, 2022

    I got the ASKAYNAK PLASMA 65 ULTRA CUTTER few weeks ago and it has proven to be very reliable

  • 5

    Plasma cutter is cute and very good

    Posted by Asuk Luke udoma on Aug 25, 2018

    I worked with this in an oilfield location and it proved very useful

View AllClose