

Caterpillar Bulldozer CATERPILLAR D6H LGP Fairly used Imported

CASE MOTOR GRADER 885VHP

CATERPILLAR G3408 Used Marine Engine


Bulldozer With Ripper Caterpillar CAT D8K used

CAT 3408 Engine, Used caterpillar Marine Engine
GZ Industrial SUpplies is the supplier of used Caterpillar heavy equipment brand in Nigeria, we import the best products into the country, This product was newly imported into the counrty and needs to be sold on full discount now, come and inspect and drive away.
This product features a 3306 turbocharged engine that produces up to 185 flywheel horsepower (fwhp), and direct drive powershift transmission with electronic control. Other specifications may differ slightly based on where a 140H motor grader was built and in what year.
Caterpillar 140H motor graders built in the United States have the serial prefix 2ZK, 8JM or 8KM. Australian models use the 9ZN prefix, and Brazilian models use the prefix 3AS, 5HM or 9TN.
The 8JM, 8KM, 5HM and 3AS units have engine power management, while other models have variable horsepower.
Total length |
8713 millimetres (28.6 feet) |
Height to top of cab |
3131 millimetres (10.3 feet) |
Width over tyres |
2464 millimetres (8.1 feet) |
Blade base |
2561 millimetres (8.4 feet) |
Wheelbase |
6169 millimetres (20.2 feet) |
Tandem axle wheelbase |
1523 millimetres (5 feet) |
Front ground clearance |
600 millimetres (2 feet) |
Rear ground clearance |
344 millimetres (1.1 feet) |
Model |
3176C DITA air-to-air aftercooled (ATAAC) variable horsepower (VHS) |
Net power, gears 1 and 2 |
165 horsepower; 123 kilowatts |
Net power, gears 3 through to 6 |
185 horsepower; 138 kilowatts |
Number of cylinders |
6 |
Displacement |
10.3 litres (629 cubic inches) |
Standard operational weight, front axle |
4138 kilograms (9123 pounds) |
Standard operational weight, rear axle |
10539 kilograms (23234 pounds) |
Standard operational weight, total |
14677 kilograms (32357 pounds) |
Maximum operational weight, front axle |
7590 kilograms (16733 pounds) |
Maximum operational weight, rear axle |
13761 kilograms (30139 pounds) |
Maximum operational weight, total |
21261 kilograms (46872 pounds) |
Fuel capacity |
397 litres (105 gallons) |
Hydraulic system fluid capacity |
68 litres (18 gallons) |
Cooling system fluid capacity |
38 litres (10 gallons) |
Rear diff/final drive fluid capacity |
47 litres (12.4 gallons) |
Circle gearbox fluid capacity |
7 litres (1.8 gallons) |
Tandem case fluid capacity |
64 litres (16.9 gallons) |
Type |
Direct drive, powershift |
Maximum forward speed |
44 kilometres per hour (27.4 miles per hour) |
Maximum reverse speed |
34.7 kilometres per hour (21.6 miles per hour) |
Number of forward gears |
8 |
Number of reverse gears |
6 |
Turning radius |
7.5 metres (24.6 feet) |
Articulation L/R |
20 degrees |
Ground clearance |
600 millimetres (2 feet) |
Wheel lean |
18 degrees |
Total oscillation |
32 degrees |
Pump type |
Axial piston |
Pump flow |
206 liters per minute (54.4 gallons per minute) |
Relief valve pressure |
24150 kilopascal (3500 pounds per square inch) |
Moldboard height |
610 millimetres (24 inches) |
Moldboard width |
3658 millimetres (12 feet) |
Moldboard thickness |
22 millimetres (0.87 inches) |
Maximum depth of cut |
715 millimetres (28.1 inches) |
Side shift left |
524 millimetres (20.6 inches) |
Side shift right |
660 millimetres (26 inches) |
Blade pull at maximum weight |
19135 kilograms (42184 pounds) |
Blade down pressure |
13017 kilograms (28697.6 pounds) |
Diameter |
1530 millimetres (60.2 inches) |
Shift left |
695 millimetres (27.4 inches) |
Shift right |
728 millimetres (28.7 inches) |
Maximum reach outside tyres - left |
1896 millimetres (74.6 inches) |
Maximum reach outside tyres - right |
1978 millimetres (77.9 inches) |
Maximum lift above ground |
480 millimetres (18.9 inches) |
Blade tip angle - front |
40 degrees |
Blade tip angle - rear |
5 degrees |