SureCrete Polyurethane Solvent-Based DK400

(No reviews yet) Write a Review
₦70,000.00
SKU:
SureCrete-DK400
Weight:
4.00 KGS
Shipping:
Calculated at Checkout
SureCrete Polyurethane Solvent-Based DK400

SureCrete Polyurethane Solvent-Based DK400

GZ Industrial Supplies Nigeria is the distributor of High Gloss Clear Floor Polyurethane Solvent-Based. Our SureCrete Polyurethane Solvent-Based DK400 is a 2 component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, concrete overlays, or as a clear top finish coat on epoxy systems. The high-gloss clear top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable.

When dealing with protective coatings for concrete, which sealer you choose can vary wildly based upon the arena that the sealer is going to be applied in, the different chemicals it will be exposed to, as well as the amount of high traffic or abrasion it will endure. In the case of selecting a sealer for an interior concrete application or overlay, there are few coatings that offer the balance of cost-efficiency and resilience as solvent polyurethane sealers. SureCrete Polyurethane Solvent-Based DK400 clear topcoat has been formulated to be one of the most mechanically and chemically resistant coatings available on the market today.

High Gloss Clear Floor Polyurethane Solvent-Based Applications:

Commercial Kitchen Floors

Retail Floor Protection

Restaurant and Bar Floors

Residential Living Areas

Interior Hotel and Resort Flooring

High-Traffic Interior Walkways

Auditorium and Stage Floors

Residential and Hotel Bedroom Floors 

Specifications and Properties of Dura-Kote Clear Water-Based Polyurethane:

Coverage   Approx 300-400 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating   less than 435 g/L
Solids Content   51%
Pot Life   approx 60 minutes
Shelf Life   1 year in original unopened container
Ready for recoat   6-8 hours (18+ hours at low temperatures)
Light Duty Use   24 hours (Up to 48 hours at low temperatures)
Heavy Traffic Ready   3 days (Up to 5 days at low temperatures)
Full Cure   5-7 days (Up to 14 days at low temperatures)
Appearance (cured)   Clear Gloss
Appearance (wet)   Clear
Water Resistance   Excellent, beads water
Mechanical Stability   Excellent
Light Stability   Excellent
Mechanical Properties   Direct Impact – 30 inch/pounds; Reverse Impact – 6 inch/pounds
Hardness   Pencil 4H, Konig 100
Diluent   Hydrocarbons
Odor   Solvent
Application Temperature   50 – 90 degrees Fahrenheit

Contact us for further details and availability within the storefront in your location.