Sigmadur 550 SIgma Marine Paint

(No reviews yet) Write a Review
₦0.00
SKU:
sigmadure-550
Weight:
20.00 KGS
Shipping:
Calculated at Checkout
Sigmadur 550 SIgma Marine Paint

Sigmadur 550 Sigma Marine Paint

GZ Industrial Supplies is a distributor of Sigma Marine coatings in Nigeria, Sigmadur 550 Sigma Marine paint is a two-component, aliphatic acrylic polyurethane finish, THE PRODUCT IS GLOSSY AND COMES IN WHITE AND VARIOUS OTHER COLORS.

CHARACTERISTICS OF SIGMADUR 550 MARINE PAINT

  • Unlimited recoatable
  • Excellent resistance to atmospheric exposure conditions
  • Excellent color and gloss retention
  • Non-chalking, non-yellowing
  • Cures at temperatures down to -5°C (23°F)
  • Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals
  • Can be recoated even after long atmospheric exposure
  • Good application properties

RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES

Substrate conditions

  • Previous coat (epoxy or polyurethane) must be dry and free from any contamination

  • Previous coat: surface should be sufficiently roughened if necessary

    Substrate temperature and application conditions

  • Substrate temperature during application at -5°C (23°F) is acceptable; provided the substrate is free from ice and dry

  • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point

  • Relative humidity during application and curing should not exceed 85%

  • Should condensation on the surface occur during, or soon after application, this could result in color and gloss change


INSTRUCTIONS FOR USE

Mixing ratio by volume: base to hardener 88:12

  • The temperature of the mixed base and hardener should be above 10°C (50°F), otherwise extra thinner may be required to obtain application viscosity

  • Thinner should be added after mixing the components

  • Adding too much thinner results in reduced sag resistance

    Induction time

    None

    Pot life

    5 hours at 20°C (68°F)

PRODUCT DATA SHEET DOWNLOADpdf-log.png 

Contact our coatings team for a free quote